SEARCH
Our Web Site
Answers to common questions on Gold Plating Real
Values
What you need to know before you buy!
Gold Plating Equipment & Supplies
Call 800-245-7450 or e-mail to
smcauto@dmci.net
Gold
Plating
Equipment
 Shopping
 Guide
International Buyers
CLICK HERE
See our on-line Gold Plating Equipment Catalog Bare Bones System
To see more of this page, scroll down using the scroll bar on the right. WB01512_.gif (115 bytes)
This Web Site has more than 200 separate web pages to help you.
PLEASE NOTE: Because we have some large pages with lots of information, the full page may take a bit of time to load. PLEASE WAIT FOR IT.
 

 

What if I want 8 ounces of Gold or other stuff?

We do that. In the old days, all we would charge is the difference between the 4 ounce and the 8 ounce sizes. The same if you want to start with 16 or 32 ounces, all we would do is to charge the difference between the standard 4 ounces and the price for whatever size you need.

After experience with customers and how they purchased what they purchased, we started shipping 8 ounces of our Best Grade of Gold Plating Solution with each 30 amp Gold Plating System. So, 8 ounces of gold plating solution is now STANDARD for shipments within the USA.

We typically started our International Customers with a minimum of 8 ounces and frequently they opted for 16 ounces. The cost of the Air Freight makes it smart to get more gold in the initial order so we raised all International customers to 16 ounces.

If you are in the USA, it may be smarter to start with just 8 ounces but we will work with whatever you  need.

We package and assemble all of the items in our gold plating system right in our facility in Reading.

So, you can do what we would call MIX and MATCH of the different quantities and or equipment components, However, this is limited to the Gold Plating Solutions and power supply options. Most customers realize that they are best off going with the 30 amp model and 8 ounces of Gold Plating Solution..

This is particularly true if you are attempting to make a comparison between what we offer and what others offer and the quantity of the gold makes a price difference.

However, there are items in some systems that add to the profit level of the seller but are meaningless to the actual process of mobile brush plating.

If you want to check the actual quantity of GOLD in the Gold Plating Solution, it gets to be a hard item for the average person to tell the difference. Basically, the make up mix is purple because of the cobalt and other ingredients. You can not tell by looking at the bottles how much gold is actually in the solution. So, we will match any quantity and grade level within the market for any gold plating solution. This simply means we may not give you the BEST GRADE because the BEST GRADE is probably a higher grade that what you will find on the average market today.

To figure out the price, you can go to our ORDER FORM. Take out the price of the 4 ounces of the BEST GOLD and insert the price for 8 ounces of our GOOD GOLD. We will include a ONE OUNCE sample of the GOOD GOLD with the 8 ounces so you will still get a chance to TRY IT OUT.

If you want to start with 16 ounces of our BEST GOLD, it is easy enough to figure that out too. However, from a practical standpoint, shipping expenses within the USA are nominal. The International Buyer has a far higher shipping cost.

We do not offer some items because they are not necessary. Or it is impractical to inventory an item that could duplicate what you already have.

In particular, we do not offer the rolling seat. If you do not already have one, you can find one at a local Auto Parts Store and pay as much as we would have to pay but you will save the freight. Besides, a lot of customers either already have a rolling stool or use a folding chair. I use a folding wooden chair I paid $2.00 for years ago. Some of the rolling stools have really nice padded seats. It is a personal choice and easier for you to get locally.

We do not offer the "GROUNDING PLATE" to go into the drain pan. We can get you one but there is no real benefit of having it. Whenever anyone is working in their drain pan, it is quite common to have both hands in the operation. One hand holds the part as well as the banana plug wire while the other hand holds the electrode holder, electrode, and the synthetic anode wrap (or wrapped cotton) soaked in the chemical for that part of the process..

So, we are happy to work with you, we have worked with others.

We are here to help you make money. Please let us know how we can help you.

To go back to the top of the frequently asked questions page, CLICK HERE.

To go to our GOLD PLATING INFORMATION PAGE, CLICK HERE.

To go to our > STARTING PAGE CLICK HERE <

To go to our > MAIN PAGE CLICK HERE< 

To go back to your previous page,
please click on your web browsers BACK button.


GOLD PLATING SOLUTION PRICES MUST NOW BE QUOTED DIRECT
DUE TO CONSTANTLY CHANGING GOLD PRICES ON THE WORLD MARKET

Web Site and Company Contact Information

We have more than 200 informational Web Pages on our Web Site.

MOBILE Gold Plating System

High Capacity - 30 AMP

 Automatic System

Shown Below.

NOW ONLY $ 995

 

Click on this link to go to the 30 AMP Gold Plating System page with detailed information.
 

Or, to go to our most popular 30 amp Gold Plating System click this link.

There are many other links to informational pages on Gold Plating in our Web Site

Here are a few quick links to helpful information pages for you.

See a way get your own rolling work cart from SEARS!

SEARCH our Web Site

 Request A Catalog

How to Order

Shipping

Web Site Legal Disclaimer

Or, to order, or to receive more information, please contact:

American Gold Plating Equipment & Supply

A Division of SMC Auto Accessories, Inc.
217 East Lincoln - Reading, Michigan 49274

VOICE 800-245-7450 - FAX 517-278-6267

International Customers call 517-278-7203

Web Site www.americangoldplating.com  

E-MAIL smcauto@dmci.net

We are a member of the Hillsdale County Chamber of Commerce & SEMA.

Copyright © 1997 American Gold Plating Equipment & Supply
Last modified: January 5, 2008